Novinka záruka 48měsíců http://chevin-research.com/

The power amplifier S1500 is designed for meeting every standard for professional amplification. Its powder coated steel face plates and heavy-duty steel chassis reflect the manufacturing quality within. Technical specification Output Power Both channel driven, 2 Ohm, 1 kHz, 1 % THD 2200 W per channel Single channel driven, 2 Ohm, 1 kHz, 1 % THD 2250 W / channel Both channel driven, 4 Ohm, 1 kHz, 1 % THD 1500 W per channel Single channel driven, 4 Ohm, 1 kHz, 1 % THD 1550 W / channel Both channel driven, 8 Ohm, 1 kHz, 1 % THD 900 W per channel Single channel driven, 8 Ohm, 1 kHz, 1 % THD 925 W / channel Bridge, 8 Ohm, 1 kHz, 1 % THD 3100 W Bridge, 4 Ohm, 1 kHz, 1 % THD 4500 W Distortion, 1 kHz, THD % < 0,02 % Frequency response - by 10 dB below nominal power 20 Hz – 20 kHz +0 /-1 dB 20 Hz – 50 kHz +0 /-1 dB Damping Factor, 8 Ohm, 1kHz > 1200 S/n Ratio S/n Ratio „A“ weighted - 103 dB - 112 dB Input Sensitivity – by nominal power / 8 Ω 1,0 V Input Impedance balanced 20 kΩ Slew Rate / 8 Ω 20 V / μS Subsonic filter On / Off 40 Hz / 80 Hz Controls Front: mains switch gain control (both channels) Rear: mode selection switch GND and subs. filter switches Indicators Bridge, Limit In, - Out: yellow LED Protect : red LED Signal: green LED Power: blue LED Cooling step switched fan air flow: front to back Protects short-circuit, thermal, load-mismatch, DC Power AC ~ 230 V / 120V 50 / 60Hz Dimensions 483 x 88 x 388 mm (2U) Weight 12,0 kg

Počet: